New labelling adhesives 2017 - P 359-3517 (PR1496)
Intercol has developed a new Adhesive based on a copolymer, recplacing other adhesives with High wet tack, with too much formaldehyd in their formulation.
These adhesives are typically used in tin can labelling industries, and also where moisture effects the labels in shining through of the adhesive pattern, winging of the labels, and bending of the labels.
This new adhesive has a high solid content as wel.
New product code: P 359-3517 (PR1496)
this labelling adhesive is specially developed for laminating labels on coated / uncoated tin.
Due to its high solids content, deformation of labels is negligible.
Due to its very good flow properties, this labelling adhesive can be used for labelling operations on most automatic labelling machines such as Langguth and Krones and is very easy to clean
Base non-flammable synthetic polymer solution in water
Colour / Appearance clear-white / liquid
Dry film clear, brittle
pH approx. 9.0-10,4
Solids content approx. 71%-73%
Density approx. 1,35 g/cm3 -1,50 g/cm3
Viscosity at 26 °C Brookfield, 20 UPM
approx. 7 000 mPa.s - 15.000 mPa.s – 25.000 mPa.s
Shelf life 6 months
Method of application:
(PR1496) label-glue can be applied by roller systems.
Depending on application speed and required viscosity, the suggested temperature range is 20 – 30 °C.
Cleaning:
Cleaning can be performed with warm water.
As adhesive manufacturer for customer developed adhesive products, we can offer a range of specialties with the requirements below:
At Intercol, as